diff --git a/README.md b/README.md
index de58917..3f7be28 100644
--- a/README.md
+++ b/README.md
@@ -47,16 +47,19 @@ Follow the programming instruction on page 8 of the [Quick Start Guide](https://
 ### briefly
 
 1. Extract the firmwares from the downloaded archive.
-1. Connect the keyboards via USB.
-1. Mod+macro1 to put the left side into bootloader mode; it should attach to your computer as a USB drive. (There's also a physical button between the Delete/Home/End keys.)
+1. Connect the left side keyboard to USB.
+1. Press Mod+macro1 to put the left side into bootloader mode; it should attach to your computer as a USB drive.
 1. Copy `left.uf2` to the USB drive and it will disconnect.
-1. Power off both keyboards (by unplugging them and making sure the switch is off).
-1. Restart the left then the right keyboard.
-1. Mod+macro3 to put the right side into bootloader mode. (There's also a physical button between the Enter/PgUp/PgDn keys.)
+1. Power off both keyboards (by unplugging them and making sure the switches are off).
+1. Turn on the left side keyboard with the switch.
+1. Connect the right side keyboard to USB to power it on.
+1. Press Mod+macro3 to put the right side into bootloader mode to attach it as a USB drive.
 1. Copy `right.uf2` to the mounted drive.
-1. Keyboard may need to be power cycled again.
+1. Unplug the right side keyboard and turn it back on.
 1. Enjoy!
 
+> Note: There are also physical reset buttons on both keyboards which can be used to enter and exit the bootloader mode. Their location is described in section 2.7 on page 9 in the [User Manual](https://kinesis-ergo.com/wp-content/uploads/Advantage360-ZMK-KB360-PRO-Users-Manual-v3-10-23.pdf) and use is described in section 5.9 on page 14. 
+
 ## Other support
 
 Further support resources can be found on Kinesis.com: