You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
84 lines
1.8 KiB
84 lines
1.8 KiB
# |
|
# Copyright (c) 2021 Polarity Works |
|
# SPDX-License-Identifier: MIT |
|
# |
|
|
|
CONFIG_SOC_SERIES_NRF52X=y |
|
CONFIG_SOC_NRF52840_QIAA=y |
|
CONFIG_BOARD_ADV360_LEFT=y |
|
CONFIG_ZMK_SPLIT=y |
|
CONFIG_ZMK_SPLIT_BLE=y |
|
CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y |
|
|
|
# Enable MPU |
|
CONFIG_ARM_MPU=y |
|
|
|
# enable GPIO |
|
CONFIG_GPIO=y |
|
|
|
|
|
# Enable SPI |
|
CONFIG_SPI=y |
|
|
|
CONFIG_SPI_NRFX=y |
|
|
|
# Enable writing to flash |
|
CONFIG_USE_DT_CODE_PARTITION=y |
|
CONFIG_MPU_ALLOW_FLASH_WRITE=y |
|
CONFIG_NVS=y |
|
CONFIG_SETTINGS_NVS=y |
|
CONFIG_FLASH=y |
|
CONFIG_FLASH_PAGE_LAYOUT=y |
|
CONFIG_FLASH_MAP=y |
|
|
|
# Enable 32kHz crystal |
|
CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y |
|
CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM=y |
|
|
|
CONFIG_ZMK_RGB_UNDERGLOW=y |
|
CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=y |
|
CONFIG_ZMK_RGB_UNDERGLOW_ON_START=y |
|
CONFIG_ZMK_RGB_UNDERGLOW_EFF_START=4 |
|
CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y |
|
|
|
# Use the STRIP config specific to the LEDs you're using |
|
CONFIG_WS2812_STRIP=y |
|
CONFIG_BT_CTLR_TX_PWR_PLUS_8=y |
|
CONFIG_PWM=y |
|
CONFIG_ZMK_LED_PWM=y |
|
CONFIG_ZMK_BACKLIGHT=y |
|
CONFIG_ZMK_BACKLIGHT_BRT_START=20 |
|
CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y |
|
|
|
CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y |
|
CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y |
|
|
|
|
|
# Turn on logging, and set ZMK logging to debug output |
|
CONFIG_LOG=y |
|
CONFIG_ZMK_USB_LOGGING=y |
|
CONFIG_ZMK_LOG_LEVEL_DBG=y |
|
CONFIG_LOG_BUFFER_SIZE=65536 |
|
CONFIG_LOG_STRDUP_BUF_COUNT=160 |
|
#CONFIG_I2C_LOG_LEVEL_DBG=y |
|
#CONFIG_SPI_LOG_LEVEL_DBG=y |
|
|
|
|
|
# Turn on USB CDC ACM device |
|
CONFIG_USB=y |
|
CONFIG_USB_DEVICE_STACK=y |
|
CONFIG_USB_CDC_ACM=y |
|
CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024 |
|
CONFIG_USB_CDC_ACM_DEVICE_NAME="CDC_ACM" |
|
CONFIG_USB_CDC_ACM_DEVICE_COUNT=1 |
|
|
|
# Enable serial console |
|
CONFIG_SERIAL=y |
|
CONFIG_CONSOLE=y |
|
CONFIG_UART_INTERRUPT_DRIVEN=y |
|
CONFIG_UART_LINE_CTRL=y |
|
|
|
# Enable USB UART, and set the console device |
|
CONFIG_UART_CONSOLE=y |
|
CONFIG_USB_UART_CONSOLE=y |
|
CONFIG_UART_CONSOLE_ON_DEV_NAME="CDC_ACM_0"
|
|
|