Config changes

Removed default brightness as that's handled by base firmware now
Added USB VID, PID and manufacturer ID
Enabled DCDC converter for marginally improved battery

config/boards/arm/adv360/Kconfig

@@ -4,4 +4,4 @@ config BOARD_ENABLE_DCDC
 	bool "Enable DCDC mode"
 	select SOC_DCDC_NRF52X
 	default y
-	depends on BOARD_BT60
+	depends on BOARD_ADV360_LEFT || BOARD_ADV360_RIGHT

config/boards/arm/adv360/adv360_left_defconfig

@@ -48,12 +48,14 @@ CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
 CONFIG_PWM=y
 CONFIG_LED_PWM=y
 CONFIG_ZMK_BACKLIGHT=y
-CONFIG_ZMK_BACKLIGHT_BRT_START=20
 CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y
 
 CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y
 CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y
 
+CONFIG_USB_DEVICE_VID=0x29EA
+CONFIG_USB_DEVICE_PID=0x0362
+CONFIG_USB_DEVICE_MANUFACTURER="Kinesis Corporation"
 
 # Turn on logging, and set ZMK logging to debug output
 CONFIG_LOG=y

config/boards/arm/adv360/adv360_right_defconfig

@@ -47,12 +47,14 @@ CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
 CONFIG_PWM=y
 CONFIG_LED_PWM=y
 CONFIG_ZMK_BACKLIGHT=y
-CONFIG_ZMK_BACKLIGHT_BRT_START=20
 CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y
 
 CONFIG_ZMK_HID_REPORT_TYPE_NKRO=y
 CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y
 
+CONFIG_USB_DEVICE_VID=0x29EA
+CONFIG_USB_DEVICE_PID=0x0362
+CONFIG_USB_DEVICE_MANUFACTURER="Kinesis Corporation"
 
 # Turn on logging, and set ZMK logging to debug output
 CONFIG_LOG=y