codegirl007
/
Adv360-Pro-ZMK
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Refine wording of steps in firmware flashing.

V3.0
Tom Plunket 3 years ago
parent
603133f060
commit
9a5d22ca99
1 changed files with 9 additions and 6 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 15
      README.md

15
README.md
Unescape View File

@ -47,16 +47,19 @@ Follow the programming instruction on page 8 of the [Quick Start Guide](https://
### briefly ### briefly
1. Extract the firmwares from the downloaded archive. 1. Extract the firmwares from the downloaded archive.
1. Connect the keyboards via USB. 1. Connect the left side keyboard to USB.
1. Mod+macro1 to put the left side into bootloader mode; it should attach to your computer as a USB drive. (There's also a physical button between the Delete/Home/End keys.) 1. Press Mod+macro1 to put the left side into bootloader mode; it should attach to your computer as a USB drive.
1. Copy `left.uf2` to the USB drive and it will disconnect. 1. Copy `left.uf2` to the USB drive and it will disconnect.
1. Power off both keyboards (by unplugging them and making sure the switch is off). 1. Power off both keyboards (by unplugging them and making sure the switches are off).
1. Restart the left then the right keyboard. 1. Turn on the left side keyboard with the switch.
1. Mod+macro3 to put the right side into bootloader mode. (There's also a physical button between the Enter/PgUp/PgDn keys.) 1. Connect the right side keyboard to USB to power it on.
1. Press Mod+macro3 to put the right side into bootloader mode to attach it as a USB drive.
1. Copy `right.uf2` to the mounted drive. 1. Copy `right.uf2` to the mounted drive.
1. Keyboard may need to be power cycled again. 1. Unplug the right side keyboard and turn it back on.
1. Enjoy! 1. Enjoy!
> Note: There are also physical reset buttons on both keyboards which can be used to enter and exit the bootloader mode. Their location is described in section 2.7 on page 9 in the [User Manual](https://kinesis-ergo.com/wp-content/uploads/Advantage360-ZMK-KB360-PRO-Users-Manual-v3-10-23.pdf) and use is described in section 5.9 on page 14.
## Other support ## Other support
Further support resources can be found on Kinesis.com: Further support resources can be found on Kinesis.com:

Write Preview
Loading…
Cancel
Save